Skip to content 
Can a Mold Company Test and Remove Mold on the Same Job in Florida?
The simple answer is No. The state of Florida does not allow any mold company to perform mold testing and mold remediation on the same property simultaneously. In Florida, a mold assessment company that performs mold inspection, mold sampling and mold testing cannot remediate mold from the same property within 12 months due to conflict-of-interest regulations. Generally, if one licensed mold company performs mold testing on any residential or commercial property in Florida, then another mold company would perform mold remediation on that property. The state of Florida implemented these rules to make sure homeowners and property managers get unbiased assessment and remediation services.
Mold Assessment VS Mold Removal
Mold Assessment
These are completely different services. In mold assessment, certified mold assessors evaluate your property and visually inspect the walls, ceilings, floors, cabinets in the kitchen, bathrooms, showers, bedrooms, attics, basements, HVAC systems, and water-damaged areas. Professional mold assessors locate mold colonies and also identify mold infestation sources on the property. They use advanced mold detection tools to detect all the hidden mold colonies behind surfaces. They also collect multiple indoor and outdoor air samples and surface mold samples. Expert mold assessors identify mold growth, contamination levels and provide independent evaluation and effective mold remediation recommendations based on the mold test report.
Professional Mold Remediation
In professional mold remediation, a licensed mold remediation company uses industrial equipment and cleaning solutions to remove all the mold colonies from your property and clean the surfaces. They install the plastic barriers and isolate the contaminated area to prevent the airflow of mold spores. They clean all the mold-damaged materials and dispose of all the materials that are beyond restoration and can cause mold to grow back in the future. They use advanced HEPA air scrubbers to filter out air and reduce mold spore counts and other airborne pollutants. Mold remediation specialists also address moisture and water intrusion issues and fix them properly.
Why Can't the Same Company Usually Test and Remove Mold in Florida?
Mold companies in Florida generally cannot test and remove mold from the same property during a single project. A single mold company cannot perform mold assessment, inspection, testing, remediation and post-mold remediation verification on one property. There is a chance that the company may identify a larger mold problem than actually exists and recommend unnecessary work to increase their profits. These rules and regulations are for the homeowners’ benefit.
Consumer Safeguards
- Fair and independent mold assessment
- Prevents biased recommendations
- More accurate mold testing results
- Helps homeowners avoid unnecessary mold remediations
- Verified mold remediation results
Conclusion
In Florida, generally separate licensed mold companies perform mold testing and mold remediation to avoid conflicts of interest. A licensed professional mold assessor evaluates the property and identifies mold growth and its sources. Another mold remediation company reviews the mold testing report and provides mold remediation services. The same company that performs mold remediation cannot provide post-mold remediation verification services for the same property. Homeowners should hire qualified mold assessors and remediation experts to keep their property safe from mold hazards.
Frequently Asked Questions
Can one company offer mold testing and mold removal in Florida?
If a mold company is licensed and registered in Florida, it can provide both mold assessment, testing and remediation services. But generally, the same company that provides mold assessment cannot provide mold remediation services for the same property within 12 months.
Is mold testing necessary before mold remediation?
Mold testing is not always necessary, but it is highly recommended. Mold is not always visible so mold testing gives you an idea about indoor air quality. Advanced mold lab analysis identifies mold type, contamination levels and mold spore concentration, and this report helps mold remediation specialists perform complete mold removal. If you need mold testing in Fort Lauderdale and nearby areas, just contact us today.
What is the correct mold removal process?
An effective mold removal process includes mold assessment, mold containment, removal of mold-affected materials, and comprehensive mold remediation. Post-remediation verification from third-party contractors helps make sure the remediation was successful.
What are the most common moisture sources in homes?
Common moisture sources include roof leaks, plumbing issues, appliance leaks, HVAC condensation and high indoor humidity levels. Poor ventilation systems in homes stop proper airflow and lead to moisture buildup.